ELECTRIC ACTUATOR

UM-11

1. Connect to quarter turn valves (such as ball valve, butterfly valve,
 and damper), control valve open and close, with ISO5211
 mounting dimension F10/F14.
2. Nylon housing, IP67 water proof that avoid water, dust, and
 corrosion damage.
3. Stable operating that avoid water hammer and noise.
4. Position indicator to show the status of valve open or close.
Specification
Voltage
AC110V  
AC220V  
AC220V 3φ
AC380V 3φ
AC440V 3φ
Fluid
Air   
Oil   
Gas   
Water 
Chem.  
Steam 
Vacuum
Other
Fluid temp
0~50℃
0~80℃
0~180℃
Others
Valve size
DN200 (8")  
DN250 (10")  
DN300 (12")  
DN350 (14")  
DN400 (16")  
DN450 (18")  
Valve material
PVC    
Cast iron
SS316   
SS304   
Others  
Mounting dimensions
ISO5211   
F10       
F14       
Max. torque
1450 N.M
Valve type
2-PC ball valve - thread 
2-PC ball valve - flange 
3-PC ball valve    
3 way ball valve -thread
3 way ball valve -flange
PVC ball valve    
butterfly valve    
Others        
Control method
Basic type ON-OFF  
DETAIL
Model Power open / close time (sec) Max. Torque(±5%)
NM
AC110V(60Hz)
Max. Torque(±5%)
NM
AC220V(60Hz)
No-loadcurrent consumption
AC
100V~120V
AC
200V~240V
UM-11 100W 65 1500 1450 1.2A 0.6A

 

  1. Suggest rated torque 75% of max. torque, use with rated torque to keep the lifetime longer. 
  2. Regulation 5 minutes per travel, if operating times over one travel in 5 minutes, kindly select our smart type (30% duty cycle) or fast type (100% duty cycle) actuator.
  3. Nylon housing standard.
  4. Waterproof: IP67, IP68  (option)
  5. Available voltage: AC110V, AC220V, DC24V, AC24V, for other voltage, kindly check with us.
  6. It’s available for ISO5211 F10/F14, it’s easy for assembly with valve.
  7. Manual override.
  8. Related products of basic type
Item no.  Max. Torque (AC220V)
UMS 10Nm
UM-1 35Nm
UM-2-5 50Nm
UM-2-7 70Nm
UM-3 150Nm
UM-3-1 150Nm
UM-4 332Nm
UM-5 487Nm
UM-6 608Nm
UM-8 929Nm
UM-10 1350Nm
UM-11 1450Nm
UM-12 3500Nm

Recommend connecting  valve:
1. 2-PC Ball valve:
    thread end (BSPT, NPT, BSP)
    flange end (JIS10K, ANSI150LB, PN10, PN16)
    SOCKET, UNION
    material: PVC, SS304, SS316

2. 3-PC Ball valve
    thread end (BSPT, NPT, BSP)
     material: SS316

3. 3 way ball valve
    thread end (BSPT, NPT, BSP)
    flange end (JIS10K, ANSI150LB, PN10, PN16)
    SOCKET, UNION
    material: PVC, SS304, SS316

4. Butterfly valve 
     wafer type: bare shaft 
     flange type: bare shaft
     lug type: bare shaft
     PVC butterfly valve
     material: PVC, FCD, SS304, SS316

Certificate link:

ISO 9001
CE
CSA
UL429

IP67


 
OPTIONAL
  • Heater

    Heater can make inside temperature of electric actuator higher and dryer to prevent the damage of the electric actuator that caused by the frozen of lube oil or the moisture. It also has the function of thermal protector. When the temperature inside the electric actuator exceed the heater can bear, the thermal protector will be triggered to lower the temperature. The voltage of heater is required as as the same as electric actuator.
    It's recommended not to install the heater when the temperature is over 35℃/95℉.
  • FAILSAFE

    For emergency use, when power fail, the function will be triggered to supply power, and the users can operate the electric actuator to open or close status.
    Introduction:
    1. Battery type.
    2. Need power to charge the
     battery ( as least 8 hours
     of the first use. )
    3. Preset the open or close in our
     factory.
    4. With extra limit switch.
    5. No IP67 of the case.
  • Extra limit switch (Dry contact)

    Feedback signal of valve status, a contact that is isolated from a power supply, volt free. 1pc of open status and 1pc of close status.
  • Aluminum housing

    Aluminum housing IP68 water
    proof protection, for outdoor
    use that against dust and water.