- Drawing
- Specification
| MODEL | PIPE SIZE | CV | ORIFICE | FLUID TEMP. (ºC) |
Operating Pressure kgf-cm2 (bar) | Dimension (mm) |
Weight (kg) |
||||||
| WATER | AIR | STEAM | LIGHT OIL | GAS | L | H | D | ||||||
| UAW-15 | 1/2" | 4.0 | 17mm | -5ºC~+80ºC | 0.5~10 | 0.5~15 | 82 | 125 | 58 | 1.60 | |||
| UAW-20 | 3/4" | 6.0 | 17mm | -5ºC~+80ºC | 0.5~10 | 0.5~15 | 82 | 125 | 58 | 1.67 | |||
| UAW-25 | 1" | 12 | 22mm | -5ºC~+80ºC | 0.5~10 | 0.5~15 | 91 | 133 | 58 | 2.02 | |||
| UAW-35 | 1-1/4" | 18 | 30mm | -5ºC~+80ºC | 1~10 | 1~15 | 111 | 141 | 58 | 3.08 | |||
| UAW-40 | 1-1/2" | 22 | 30mm | -5ºC~+80ºC | 1~10 | 1~15 | 111 | 144 | 58 | 3.10 | |||
| UAW-50 | 2" | 48 | 50mm | -5ºC~+80ºC | 1~10 | 1~15 | 163 | 175 | 58 | 6.82 | |||
- Material
| PARTS | Coil | Tube | Spring | Core | Plug | Piston | Piston Plug | Valve Body |
| MATERIAL | Special Copper Wire (H Class) |
Stainless Steel | Stainless Steel | Stainless Steel | PTFE+15%GF | Brass | NBR | Cast Bronze |
- Description
- UAW series is multiplex, pilot operated piston, conductive, and normally close (NC) 2/2 solenoid valve
- Specially suitable for frequent operation
- Availability of fluid: water, air
- Cautions
- Minimum pressure to operate: over 0.5~1kgf-cm2
- Before installation depressurize the piping system and clean internally.
- For the protection of the equipment install a strainer or filter suitable for the service involved in the inlet side as close to the solenoid valve as possible.
- AC voltage tolerance: +/- 10%; DC voltage tolerance: +/- 1%
- All standard solenoid valve MUST be mounted vertically upright.
- Not suitable for fluid as below:
- Liquid status when it is at high temperature; solid status when it is cool.
- Corrosive fluid
- Viscosity over 50cst
- YOU MIGHT BE INTERESTED
