- Drawing
- Specification
| MODEL | PIPE SIZE | CV | ORIFICE | FLUID TEMP. (ºC) |
Operating Pressure kgf-cm2 (bar) | Dimension (mm) |
Weight (kg) |
||||||
| WATER | AIR | STEAM | LIGHT OIL | GAS | L | H | D | ||||||
| US-35F-NO | 1-1/4" | 22 | 35mm | -5ºC~+130ºC | 1~8 | 1~8 | 1~8 | 200 | 220 | 48 | 10.90 | ||
| US-40F-NO | 1-1/2" | 30 | 40mm | -5ºC~+130ºC | 1~8 | 1~8 | 1~8 | 200 | 220 | 48 | 11.10 | ||
| US-50F-NO | 2" | 40 | 50mm | -5ºC~+130ºC | 1~8 | 1~8 | 1~8 | 210 | 233 | 48 | 13.40 | ||
| US-65F-NO | 2-1/2" | 68 | 65mm | -5ºC~+130ºC | 1~8 | 1~8 | 1~8 | 240 | 240 | 48 | 19.40 | ||
| US-80F-NO | 3" | 100 | 80mm | -5ºC~+130ºC | 1~8 | 1~8 | 1~8 | 300 | 259 | 48 | 27.20 | ||
| US-100F-NO | 4" | 175 | 100mm | -5ºC~+130ºC | 1~8 | 1~8 | 1~8 | 340 | 274 | 48 | 38.90 | ||
- Material
| PARTS | Coil | Tube | Spring | Core | Plug | Piston Spring | Piston Plug | Valve Body |
| MATERIAL | Special Copper Wire (H Class) |
Stainless Steel | Stainless Steel | Stainless Steel | VITON | Stainless Steel | PTFE | Cast Iron (FC-20) |
- Description
- US-F-NO series is multiplex, pilot operated piston, conductive, and normally open (NO) 2/2 solenoid valve
- Availability of fluid: water, air, light oil
- Acceptable for customize VITON (130ºC), Silicone (130ºC) and EPDM (130ºC) for plug
- Cautions
- Minimum pressure to operate: over 0.5kgf-cm2
- Before installation depressurize the piping system and clean internally.
- For the protection of the equipment install a strainer or filter suitable for the service involved in the inlet side as close to the solenoid valve as possible.
- AC voltage tolerance: +/- 10%; DC voltage tolerance: +/- 1%
- All standard solenoid valve MUST be mounted vertically upright.
- Not suitable for fluid as below:
- Liquid status when it is at high temperature; solid status when it is cool.
- Corrosive fluid
- Viscosity over 20cst
