- Drawing
- Specification
| MODEL | PIPE SIZE | CV | ORIFICE | FLUID TEMP. (ºC) |
Operating Pressure kgf-cm2 (bar) | Dimension (mm) |
Weight (kg) |
||||||
| WATER | AIR | STEAM | LIGHT OIL | GAS | L | H | D | ||||||
| SUS-80FNO | 3" | 100 | 80mm | -5ºC~+130ºC | 1~8 | 1~8 | 1~8 | 240 | 252 | 58 | 20.00 | ||
- Material
| PARTS | Coil | Tube | Spring | Core | Plug | Piston | Piston Plug | Valve Body |
| MATERIAL | Special Copper Wire (H Class) |
Stainless Steel | Stainless Steel | Stainless Steel | VITON | Stainless Steel | PTFE | Stainless Steel |
- Description
- SUS-FNO series is multiplex, pilot operated piston, conductive, and normally close (NC) 2/2 solenoid valve
- Availability of fluid: water, air, light oil
- Cautions
- Minimum pressure to operate: over 1kgf-cm2
- Before installation depressurize the piping system and clean internally.
- For the protection of the equipment install a strainer or filter suitable for the service involved in the inlet side as close to the solenoid valve as possible.
- AC voltage tolerance: +/- 10%; DC voltage tolerance: +/- 1%
- All standard solenoid valve MUST be mounted vertically upright.
- Not suitable for fluid as below:
- Liquid status when it is at high temperature; solid status when it is cool.
- Corrosive fluid
- Viscosity over 20cst
