SOLENOID VALVE

SUS-15NO~50NO

Specification
Voltage
DC24V
AC24V
AC110V
AC220V
AC380V
Fluid
water   
air     
light oil   
steam   
Fluid temp
-5℃~+130℃
Operating pressure
3 bar   
5 bar   
7 bar   
8 bar   
10 bar   
Valve size
1/2"   
3/4"   
1"   
1-1/4"   
1-1/2"   
2"   
Valve material
SS304  
SS316   
Connecting interface
PT thread        
BSP thread        
NPT thread
Matching coil
iron case coil (2-wire)   
waterproof coil (2-wire)   
waterproof coil (DIN PLUG)   
Action mode
normally open (NO)
DETAIL
  • Drawing
  • Specification
MODEL PIPE SIZE CV ORIFICE FLUID TEMP.
(ºC)
Operating Pressure kgf-cm2 (bar) Dimension (mm)
Weight
(kg)
WATER AIR STEAM LIGHT OIL GAS L H D
SUS-15NO 1/2" 4.0 17mm -5ºC~+130ºC 0.5~10 0.5~10   0.5~8   84 147 48 1.52
SUS-20NO 3/4" 6.0 17mm -5ºC~+130ºC 0.5~10 0.5~10   0.5~8   84 151 48 1.58
SUS-25NO 1" 12 22mm -5ºC~+130ºC 0.5~10 0.5~10   0.5~8   98 162 48 2.00
SUS-35NO 1-1/4" 18 30mm -5ºC~+130ºC 1~10 1~10   0.5~8   123 173 48 2.80
SUS-40NO 1-1/2" 22 30mm -5ºC~+130ºC 1~10 1~10   0.5~8   123 175 48 2.90
SUS-50NO 2" 48 50mm -5ºC~+130ºC 1~8 1~8   0.5~8   167 203 48 5.70
  • Material
PARTS Coil Tube Spring Core Plug Piston Spring Piston Piston Plug Valve Body
MATERIAL Special Copper Wire
(H Class)
Stainless Steel Stainless Steel Stainless Steel VITON Stainless Steel Stainless Steel PTFE Stainless Steel
​​​​​​​
  • Description
    • SUS-NO series is multiplex, pilot operated piston, conductive, and normally open (NO) 2/2 solenoid valve
    • Specially suitable for frequent operation
    • Availability of fluid: water, air, steam, light oil
    • Acceptable for customize VITON, Silicone and EPDM for plug
 
  • Cautions
    • Minimum pressure to operate: over 0.5kgf-cm2
    • Before installation depressurize the piping system and clean internally.
    • For the protection of the equipment install a strainer or filter suitable for the service involved in the inlet side as close to the solenoid valve as possible.
    • AC voltage tolerance: +/- 10%; DC voltage tolerance: +/- 1%
    • All standard solenoid valve MUST be mounted vertically upright.
    • Not suitable for fluid as below:
      • Liquid status when it is at high temperature; solid status when it is cool.
      • Corrosive fluid
      • Viscosity over 20cst
 
OPTIONAL
  • Coil Set

    Iron Case Coil, Waterproof Coil, DIN PLUG, NASS DIN
  • Tube Set

  • Core, Spring Set

    Material of Plug: NBR, VITON, SILICONE, EPDM, PTFE
  • Piston, Spring Set

    Material of Piston Plug: NBR, PTFE