SOLENOID VALVE

UWF-10~50

Specification
Voltage
DC12V
DC24V
AC24V
AC110V
AC220V
AC380V
AC440V
Fluid
water   
air     
light oil   
Fluid temp
-5℃~+80℃ 
-5℃~+130℃
Operating pressure
0.5 bar   
1 bar   
3 bar   
5 bar   
7 bar   
8 bar   
10 bar   
Valve size
3/8"   
1/2"   
3/4"   
1"   
1-1/4"   
1-1/2"   
2"   
Valve material
brass
Connecting interface
JIS10K flange        
ANSI150LB flange        
PN16 flange        
Matching coil
iron case coil (2-wire)   
waterproof coil (2-wire)   
waterproof coil (DIN PLUG)   
NASS DIN coil
Action mode
normally close (NC)
DETAIL
  • Drawing
  • Specification
MODEL PIPE SIZE CV ORIFICE FLUID TEMP.
(ºC)
Operating Pressure kgf-cm2 (bar) High Pressure Type Dimension (mm)
Weight
(kg)
WATER AIR LIGHT OIL WATER AIR L H D
UWF-10 3/8" 2.4 15mm -5ºC~+80ºC 0~5 0~7 0~5 0.5~10 0.5~20 100 100 48 2.12
UWF-15 1/2" 4.5 15mm -5ºC~+80ºC 0~5 0~7 0~5 0.5~10 0.5~20 110 100 48 2.12
UWF-20 3/4" 8.6 20mm -5ºC~+80ºC 0~5 0~7 0~5 0.5~10 0.5~20 110 107 48 2.63
UWF-25 1" 12 25mm -5ºC~+80ºC 0~5 0~7 0~5 0.5~10 0.5~20 150 112 48 4.10
UWF-35 1-1/4" 24 35mm -5ºC~+80ºC 0~5 0~7 0~5 0.5~10 0.5~20 170 113 48 5.90
UWF-40 1-1/2" 28 40mm -5ºC~+80ºC 0~5 0~7 0~5 0.5~10 0.5~20 170 118 48 6.40
UWF-50 2" 48 50mm -5ºC~+80ºC 0~5 0~7 0~5 0.5~10 0.5~20 210 125 48 9.20
  • Material
PARTS Coil Tube Spring Core Plug Diaphragm Valve Body
MATERIAL Special Copper Wire
(H Class)
Stainless Steel Stainless Steel Stainless Steel NBR NBR Forged Brass
 
  • Description
    • UWF series is direct, multiplex, connected diaphragm, conductive, and normally close (NC) 2/2 solenoid valve
    • Able to be operated directly under low pressure
    • Availability of fluid: water, air, light oil
    • Acceptable for customization VITON (130ºC), Silicone (130ºC) and EPDM (130ºC, only available for UWF-20~25)
 
  • Cautions
    • Before installation depressurize the piping system and clean internally.
    • For the protection of the equipment install a strainer or filter suitable for the service involved in the inlet side as close to the solenoid valve as possible.
    • AC voltage tolerance: +/- 10%; DC voltage tolerance: +/- 1%
    • All standard solenoid valve MUST be mounted vertically upright.
    • Not suitable for fluid as below:
      • Liquid status when it is at high temperature; solid status when it is cool.
      • Corrosive fluid
      • Viscosity over 20cst
   
  • YOU MIGHT BE INTERESTED
            UW-35F~100F                      SUWF-15~50                            SUW-80F 




 
OPTIONAL
  • Coil Set

    Iron Case Coil, Waterproof Coil, DIN PLUG, NASS DIN
  • Tube Set

  • Core, Spring Set

    Material of Plug: NBR, VITON, SILICONE, EPDM, PTFE
  • Diaphragm, Spring Set

    Material of Diaphragm: NBR, VITON, SILICONE, EPDM, PTFE