- Drawing
- Specification
| MODEL | PIPE SIZE | CV | ORIFICE | FLUID TEMP. (ºC) |
Operating Pressure kgf-cm2 (bar) | VACUUM (Torr) |
Dimension (mm) |
Weight (kg) |
||||||
| WATER | AIR | STEAM | LIGHT OIL | GAS | L | H | D | |||||||
| UAO-8 | 1/4" | 2.5 | 10mm | -5ºC~+80ºC | 0.5~15 | 0.5~15 | 0.5~15 | 0~10-3 | 50 | 95 | 48 | 1.13 | ||
| UAO-10 | 3/8" | 2.5 | 10mm | -5ºC~+80ºC | 0.5~15 | 0.5~15 | 0.5~15 | 0~10-3 | 50 | 95 | 48 | 1.10 | ||
| UAO-15 | 1/2" | 2.5 | 10mm | -5ºC~+80ºC | 0.5~15 | 0.5~15 | 0.5~15 | 0~10-3 | 54 | 100 | 48 | 1.23 | ||
- Material
| PARTS | Coil | Tube | Spring | Core | Plug | Piston | Piston Plug | Valve Body |
| MATERIAL | Special Copper Wire (H Class) |
Stainless Steel | Stainless Steel | Stainless Steel | NBR (Viton, Silicone, PTFE) |
Brass | NBR | Brass |
- Description
- UAO series is multiplex, pilot operated piston, conductive, and normally close (NC) 2/2 solenoid valve
- Availability of fluid: water, air, heavy oil
- Specially suitable for frequent operation
- Applicable for sabd blasting equipment and high-pressured air and oil injection system
- Cautions
- Minimum pressure to operate: over 0.5kgf-cm2
- Before installation depressurize the piping system and clean internally.
- For the protection of the equipment install a strainer or filter suitable for the service involved in the inlet side as close to the solenoid valve as possible.
- AC voltage tolerance: +/- 10%; DC voltage tolerance: +/- 1%
- All standard solenoid valve MUST be mounted vertically upright.
- Not suitable for fluid as below:
- Liquid status when it is at high temperature; solid status when it is cool.
- Corrosive fluid
- Viscosity over 20cst
- YOU MIGHT BE INTERESTED
