- Drawing
- Specification
| MODEL | PIPE SIZE | CV | ORIFICE | FLUID TEMP. (ºC) |
Operating Pressure kgf-cm2 (bar) | VACUUM (Torr) |
Dimension (mm) |
Weight (kg) |
||||||
| WATER | AIR | STEAM | LIGHT OIL | GAS | L | H | D | |||||||
| UDC-8 | 1/4" | 0.28 | 6.5mm | -5ºC~+80ºC | 0~1 | 0~1 | 50 | 90 | 48 | 0.53 | ||||
| UDC-10 | 3/8" | 0.28 | 6.5mm | -5ºC~+80ºC | 0~1 | 0~1 | 50 | 90 | 48 | 0.52 | ||||
| UDC-15 | 1/2" | 0.28 | 6.5mm | -5ºC~+80ºC | 0~1 | 0~1 | 55 | 93 | 48 | 0.58 | ||||
| UDC-20 | 3/4" | 3.5 | 10mm | -5ºC~+80ºC | 0~0.5 | 0~0.5 | 76 | 119 | 58 | 1.84 | ||||
| UDC-25 | 1" | 3.5 | 10mm | -5ºC~+80ºC | 0~0.5 | 0~0.5 | 76 | 119 | 58 | 1.80 | ||||
- Material
| PARTS | Coil | Tube | Spring | Core | O-ring | Diaphragm | Valve Body |
| MATERIAL | Special Copper Wire (H Class) |
Stainless Steel | Stainless Steel | Stainless Steel | Synthetic Rubber | NBR with PTFE coating | UPVC |
- Description
- UDC series is direct-acting, conductive, and normally close (NC) 2/2 solenoid valve
- Able to be operated directly without pressure
- Availability of fluid: water, air
- UPVC valve body is corrosion-resistant (pH3~11)
- Cautions
- Before installation depressurize the piping system and clean internally.
- For the protection of the equipment install a strainer or filter suitable for the service involved in the inlet side as close to the solenoid valve as possible.
- AC voltage tolerance: +/- 10%; DC voltage tolerance: +/- 1%
- All standard solenoid valve MUST be mounted vertically upright.
- Not suitable for fluid as below:
- Liquid status when it is at high temperature; solid status when it is cool.
- Corrosive fluid
- Viscosity over 20cst
- YOU MIGHT BE INTERESTED
